Merge tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull late ipmi fixes from Corey Minyard:
"Some annoying issues in the IPMI driver that would be good to have
fixed before 4.0 is released.
These got reported or discovered late, but they will avoid some
situations that would cause lots of log spam and in one case a
deadlock"
* tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi_ssif: Use interruptible completion for waiting in the thread
ipmi/powernv: Fix minor locking bug
ipmi: Handle BMCs that don't allow clearing the rcv irq bit
diff --git a/drivers/char/ipmi/ipmi_powernv.c b/drivers/char/ipmi/ipmi_powernv.c
index 79524ed..8753b0f 100644
--- a/drivers/char/ipmi/ipmi_powernv.c
+++ b/drivers/char/ipmi/ipmi_powernv.c
@@ -125,6 +125,7 @@
spin_lock_irqsave(&smi->msg_lock, flags);
if (!smi->cur_msg) {
+ spin_unlock_irqrestore(&smi->msg_lock, flags);
pr_warn("no current message?\n");
return 0;
}
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index f6646ed..518585c 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -263,6 +263,11 @@
bool supports_event_msg_buff;
/*
+ * Can we clear the global enables receive irq bit?
+ */
+ bool cannot_clear_recv_irq_bit;
+
+ /*
* Did we get an attention that we did not handle?
*/
bool got_attn;
@@ -461,6 +466,9 @@
* allocate messages, we just leave them in the BMC and run the system
* polled until we can allocate some memory. Once we have some
* memory, we will re-enable the interrupt.
+ *
+ * Note that we cannot just use disable_irq(), since the interrupt may
+ * be shared.
*/
static inline bool disable_si_irq(struct smi_info *smi_info)
{
@@ -549,20 +557,15 @@
if (smi_info->supports_event_msg_buff)
enables |= IPMI_BMC_EVT_MSG_BUFF;
- else
- enables &= ~IPMI_BMC_EVT_MSG_BUFF;
- if (smi_info->irq && !smi_info->interrupt_disabled)
+ if ((smi_info->irq && !smi_info->interrupt_disabled) ||
+ smi_info->cannot_clear_recv_irq_bit)
enables |= IPMI_BMC_RCV_MSG_INTR;
- else
- enables &= ~IPMI_BMC_RCV_MSG_INTR;
if (smi_info->supports_event_msg_buff &&
smi_info->irq && !smi_info->interrupt_disabled)
enables |= IPMI_BMC_EVT_MSG_INTR;
- else
- enables &= ~IPMI_BMC_EVT_MSG_INTR;
*irq_on = enables & (IPMI_BMC_EVT_MSG_INTR | IPMI_BMC_RCV_MSG_INTR);
@@ -2900,6 +2903,96 @@
return rv;
}
+/*
+ * Some BMCs do not support clearing the receive irq bit in the global
+ * enables (even if they don't support interrupts on the BMC). Check
+ * for this and handle it properly.
+ */
+static void check_clr_rcv_irq(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp) {
+ printk(KERN_WARNING PFX "Out of memory allocating response for"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ return;
+ }
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from get"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot check recv irq bit"
+ " handling.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if ((resp[3] & IPMI_BMC_RCV_MSG_INTR) == 0)
+ /* Already clear, should work ok. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] & ~IPMI_BMC_RCV_MSG_INTR;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from set"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot check recv irq bit"
+ " handling.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0) {
+ /*
+ * An error when setting the event buffer bit means
+ * clearing the bit is not supported.
+ */
+ printk(KERN_WARNING PFX "The BMC does not support clearing"
+ " the recv irq bit, compensating, but the BMC needs to"
+ " be fixed.\n");
+ smi_info->cannot_clear_recv_irq_bit = true;
+ }
+ out:
+ kfree(resp);
+}
+
static int try_enable_event_buffer(struct smi_info *smi_info)
{
unsigned char msg[3];
@@ -3395,6 +3488,8 @@
goto out_err;
}
+ check_clr_rcv_irq(new_smi);
+
setup_oem_data_handler(new_smi);
setup_xaction_handlers(new_smi);
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index f6e378d..f40e3bd 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -468,11 +468,13 @@
int result;
/* Wait for something to do */
- wait_for_completion(&ssif_info->wake_thread);
- init_completion(&ssif_info->wake_thread);
-
+ result = wait_for_completion_interruptible(
+ &ssif_info->wake_thread);
if (ssif_info->stopping)
break;
+ if (result == -ERESTARTSYS)
+ continue;
+ init_completion(&ssif_info->wake_thread);
if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
result = i2c_smbus_write_block_data(
