diff --git a/MAINTAINERS b/MAINTAINERS
index 51d9281..5b2ad6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2525,7 +2525,7 @@
 ETHERTEAM 16I DRIVER
 M:	Mika Kuoppala <miku@iki.fi>
 S:	Maintained
-F:	drivers/net/eth16i.c
+F:	drivers/net/ethernet/fujitsu/eth16i.c
 
 EXT2 FILE SYSTEM
 M:	Jan Kara <jack@suse.cz>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c1e491a..27f97b4e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -428,18 +428,6 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called dnet.
 
-config AT1700
-	tristate "AT1700/1720 support (EXPERIMENTAL)"
-	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called at1700.
-
 config HP100
 	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
 	depends on ISA || EISA || PCI
@@ -451,34 +439,6 @@
 	  To compile this driver as a module, choose M here. The module
 	  will be called hp100.
 
-config NET_ISA
-	bool "Other ISA cards"
-	depends on ISA
-	---help---
-	  If your network (Ethernet) card hasn't been mentioned yet and its
-	  bus system (that's the way the cards talks to the other components
-	  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
-	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the remaining ISA network card questions. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-config ETH16I
-	tristate "ICL EtherTeam 16i/32 support"
-	depends on NET_ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eth16i.
-
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
 	depends on ISA || EISA || PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7e1128f..07cad1a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -96,10 +96,7 @@
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_AT1700) += at1700.o
 obj-$(CONFIG_CPMAC) += cpmac.o
-
-obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index bdc0df8..d3aff74 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -24,6 +24,7 @@
 source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ac60ac90..b098c5e 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
+obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
 obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 0000000..2cd968ed
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,53 @@
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+	bool "Fujitsu devices"
+	depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  the questions about Fujitsu cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config AT1700
+	tristate "AT1700/1720 support (EXPERIMENTAL)"
+	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called at1700.
+
+config PCMCIA_FMVJ18X
+	tristate "Fujitsu FMV-J18x PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	---help---
+	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called fmvj18x_cs.  If unsure, say N.
+
+config ETH16I
+	tristate "ICL EtherTeam 16i/32 support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eth16i.
+
+endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 0000000..2730ae6
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c
similarity index 100%
rename from drivers/net/at1700.c
rename to drivers/net/ethernet/fujitsu/at1700.c
diff --git a/drivers/net/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
similarity index 100%
rename from drivers/net/eth16i.c
rename to drivers/net/ethernet/fujitsu/eth16i.c
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
similarity index 100%
rename from drivers/net/pcmcia/fmvj18x_cs.c
rename to drivers/net/ethernet/fujitsu/fmvj18x_cs.c
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index f5a738f..80d291e 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,16 +21,6 @@
 
 if NET_PCMCIA && PCMCIA
 
-config PCMCIA_FMVJ18X
-	tristate "Fujitsu FMV-J18x PCMCIA support"
-	select CRC32
-	help
-	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
-	  PCMCIA (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called fmvj18x_cs.  If unsure, say N.
-
 config PCMCIA_XIRC2PS
 	tristate "Xircom 16-bit PCMCIA support"
 	help
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index f9c9883..ccf5535 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,7 +3,6 @@
 #
 
 # 16-bit client drivers
-obj-$(CONFIG_PCMCIA_FMVJ18X)	+= fmvj18x_cs.o
 obj-$(CONFIG_PCMCIA_XIRC2PS)	+= xirc2ps_cs.o
 obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o