// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2022 Microchip Technology Inc */

/dts-v1/;

#include "mpfs.dtsi"
#include "mpfs-sev-kit-fabric.dtsi"

/ {
	#address-cells = <2>;
	#size-cells = <2>;
	model = "Microchip PolarFire-SoC SEV Kit";
	compatible = "microchip,mpfs-sev-kit", "microchip,mpfs";

	aliases {
		ethernet0 = &mac1;
		serial0 = &mmuart0;
		serial1 = &mmuart1;
		serial2 = &mmuart2;
		serial3 = &mmuart3;
		serial4 = &mmuart4;
	};

	chosen {
		stdout-path = "serial1:115200n8";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		fabricbuf0ddrc: buffer@80000000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0x80000000 0x0 0x2000000>;
		};

		fabricbuf1ddrnc: buffer@c4000000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xc4000000 0x0 0x4000000>;
		};

		fabricbuf2ddrncwcb: buffer@d4000000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xd4000000 0x0 0x4000000>;
		};
	};

	ddrc_cache: memory@1000000000 {
		device_type = "memory";
		reg = <0x10 0x0 0x0 0x76000000>;
	};
};

&i2c0 {
	status = "okay";
};

&gpio2 {
	interrupts = <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>,
		     <53>, <53>, <53>, <53>;
	status = "okay";
};

&mac0 {
	status = "okay";
	phy-mode = "sgmii";
	phy-handle = <&phy0>;
	phy1: ethernet-phy@9 {
		reg = <9>;
	};
	phy0: ethernet-phy@8 {
		reg = <8>;
	};
};

&mac1 {
	status = "okay";
	phy-mode = "sgmii";
	phy-handle = <&phy1>;
};

&mbox {
	status = "okay";
};

&mmc {
	status = "okay";
	bus-width = <4>;
	disable-wp;
	cap-sd-highspeed;
	cap-mmc-highspeed;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	sd-uhs-sdr12;
	sd-uhs-sdr25;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
};

&mmuart1 {
	status = "okay";
};

&mmuart2 {
	status = "okay";
};

&mmuart3 {
	status = "okay";
};

&mmuart4 {
	status = "okay";
};

&refclk {
	clock-frequency = <125000000>;
};

&rtc {
	status = "okay";
};

&syscontroller {
	status = "okay";
};

&usb {
	status = "okay";
	dr_mode = "otg";
};