// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (C) 2020 MediaTek Inc.
 * Author: Seiya Wang <seiya.wang@mediatek.com>
 */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "mt8192.dtsi"
#include "mt6359.dtsi"

/ {
	model = "MediaTek Asurada rev1 board";
	compatible = "google,asurada-rev1", "google,asurada", "mediatek,mt6873";

	aliases {
		serial0 = &uart0;
	};

	backlight_lcd0: backlight_lcd0 {
		compatible = "pwm-backlight";
		pwms = <&pwm0 0 500000>;
		power-supply = <&ppvar_sys>;
		enable-gpios = <&pio 152 0>;
		brightness-levels = < 0 1023 >;
		num-interpolated-steps = <1023>;
		default-brightness-level = <576>;
		status = "okay";
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	dmic_codec: dmic-codec {
		compatible = "dmic-codec";
		num-channels = <2>;
		wakeup-delay-ms = <50>;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x80000000>;
	};

	sound: mt8192-sound {
		mediatek,platform = <&afe>;
		mediatek,hdmi-codec = <&anx_bridge_dp>;
		pinctrl-names = "aud_clk_mosi_off",
				"aud_clk_mosi_on",
				"aud_dat_mosi_off",
				"aud_dat_mosi_on",
				"aud_dat_miso_off",
				"aud_dat_miso_on",
				"vow_dat_miso_off",
				"vow_dat_miso_on",
				"vow_clk_miso_off",
				"vow_clk_miso_on",
				"aud_nle_mosi_off",
				"aud_nle_mosi_on",
				"aud_dat_miso2_off",
				"aud_dat_miso2_on",
				"aud_gpio_i2s0_off",
				"aud_gpio_i2s0_on",
				"aud_gpio_i2s1_off",
				"aud_gpio_i2s1_on",
				"aud_gpio_i2s2_off",
				"aud_gpio_i2s2_on",
				"aud_gpio_i2s3_off",
				"aud_gpio_i2s3_on",
				"aud_gpio_i2s5_off",
				"aud_gpio_i2s5_on",
				"aud_gpio_i2s6_off",
				"aud_gpio_i2s6_on",
				"aud_gpio_i2s7_off",
				"aud_gpio_i2s7_on",
				"aud_gpio_i2s8_off",
				"aud_gpio_i2s8_on",
				"aud_gpio_i2s9_off",
				"aud_gpio_i2s9_on",
				"aud_dat_mosi_ch34_off",
				"aud_dat_mosi_ch34_on",
				"aud_dat_miso_ch34_off",
				"aud_dat_miso_ch34_on",
				"aud_gpio_tdm_off",
				"aud_gpio_tdm_on";
		pinctrl-0 = <&aud_clk_mosi_off>;
		pinctrl-1 = <&aud_clk_mosi_on>;
		pinctrl-2 = <&aud_dat_mosi_off>;
		pinctrl-3 = <&aud_dat_mosi_on>;
		pinctrl-4 = <&aud_dat_miso_off>;
		pinctrl-5 = <&aud_dat_miso_on>;
		pinctrl-6 = <&vow_dat_miso_off>;
		pinctrl-7 = <&vow_dat_miso_on>;
		pinctrl-8 = <&vow_clk_miso_off>;
		pinctrl-9 = <&vow_clk_miso_on>;
		pinctrl-10 = <&aud_nle_mosi_off>;
		pinctrl-11 = <&aud_nle_mosi_on>;
		pinctrl-12 = <&aud_dat_miso2_off>;
		pinctrl-13 = <&aud_dat_miso2_on>;
		pinctrl-14 = <&aud_gpio_i2s0_off>;
		pinctrl-15 = <&aud_gpio_i2s0_on>;
		pinctrl-16 = <&aud_gpio_i2s1_off>;
		pinctrl-17 = <&aud_gpio_i2s1_on>;
		pinctrl-18 = <&aud_gpio_i2s2_off>;
		pinctrl-19 = <&aud_gpio_i2s2_on>;
		pinctrl-20 = <&aud_gpio_i2s3_off>;
		pinctrl-21 = <&aud_gpio_i2s3_on>;
		pinctrl-22 = <&aud_gpio_i2s5_off>;
		pinctrl-23 = <&aud_gpio_i2s5_on>;
		pinctrl-24 = <&aud_gpio_i2s6_off>;
		pinctrl-25 = <&aud_gpio_i2s6_on>;
		pinctrl-26 = <&aud_gpio_i2s7_off>;
		pinctrl-27 = <&aud_gpio_i2s7_on>;
		pinctrl-28 = <&aud_gpio_i2s8_off>;
		pinctrl-29 = <&aud_gpio_i2s8_on>;
		pinctrl-30 = <&aud_gpio_i2s9_off>;
		pinctrl-31 = <&aud_gpio_i2s9_on>;
		pinctrl-32 = <&aud_dat_mosi_ch34_off>;
		pinctrl-33 = <&aud_dat_mosi_ch34_on>;
		pinctrl-34 = <&aud_dat_miso_ch34_off>;
		pinctrl-35 = <&aud_dat_miso_ch34_on>;
		pinctrl-36 = <&aud_gpio_tdm_off>;
		pinctrl-37 = <&aud_gpio_tdm_on>;
	};

	panel: panel {
		compatible = "auo,b116xw03";
		power-supply = <&pp3300_panel>;
		ddc-i2c-bus = <&i2c3>;
		backlight = <&backlight_lcd0>;

		port {
			panel_in: endpoint {
				remote-endpoint = <&anx7625_out>;
			};
		};
	};

	pp1000_dpbrdg: pp1000-dpbrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp1000_dpbrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp1000_dpbrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
	};

	pp1000_mipibrdg: pp1000-mipibrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp1000_mipibrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp1000_mipibrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
	};

	/* system wide LDO 1.8V power rail */
	pp1800_ldo_g: pp1800-ldo-g {
		compatible = "regulator-fixed";
		regulator-name = "pp1800_ldo_g";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&pp3300_g>;
	};

	pp1800_dpbrdg: pp1800-dpbrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp1800_dpbrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp1800_dpbrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
	};

	pp1800_mipibrdg: pp1800-mipibrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp1800_mipibrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp1800_mipibrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
	};

	pp3300_dpbrdg: pp3300-dpbrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_dpbrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp3300_dpbrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
	};

	/* system wide switching 3.3V power rail */
	pp3300_g: pp3300-g {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_g";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&ppvar_sys>;
	};

	/* system wide LDO 3.3V power rail */
	pp3300_ldo_z: pp3300-ldo-z {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_ldo_z";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&ppvar_sys>;
	};

	pp3300_mipibrdg: pp3300-mipibrdg {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_mipibrdg";
		pinctrl-names = "default";
		pinctrl-0 = <&pp3300_mipibrdg_en>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
	};

	/* Probably useless, as we use pp3300_mipibrdg for panel power */
	pp3300_panel: pp3300-panel {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_panel";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pp3300_panel_pins>;

		enable-active-high;
		regulator-boot-on;

		gpio = <&pio 136 GPIO_ACTIVE_HIGH>;
	};

	/* separately switched 3.3V power rail */
	pp3300_u: pp3300-u {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_u";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		/* enable pin wired to GPIO controlled by EC */
		vin-supply = <&pp3300_g>;
	};

	/* system wide switching 5.0V power rail */
	pp5000_a: pp5000-a {
		compatible = "regulator-fixed";
		regulator-name = "pp5000_a";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&ppvar_sys>;
	};

	/* system wide semi-regulated power rail from battery or USB */
	ppvar_sys: ppvar-sys {
		compatible = "regulator-fixed";
		regulator-name = "ppvar_sys";
		regulator-always-on;
		regulator-boot-on;
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		scp_mem_reserved: scp_mem_region {
			compatible = "shared-dma-pool";
			reg = <0 0x50000000 0 0x2900000>;
			no-map;
		};

		wifi_restricted_dma_region: wifi_restricted_dma_region {
			compatible = "restricted-dma-pool";
			reg = <0 0xC0000000 0 0x4000000>;
		};
	};
};

&afe {
	i2s9-share = "I2S8";
};

&dpi0 {
	pinctrl-names = "sleep", "default";
	pinctrl-0 = <&dpi_pin_default>;
	pinctrl-1 = <&dpi_pin_func>;
	status = "okay";
	ports {
		port {
			dpi_out: endpoint {
				remote-endpoint = <&anx7625_dp_in>;
			};
		};
	};
};

&dsi0 {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	ports {
		port {
			dsi_out: endpoint {
				remote-endpoint = <&anx7625_in>;
			};
		};
	};
};

&gpu {
	supply-names = "mali","sram";
	mali-supply = <&mt6315_7_vbuck1>;
	sram-supply = <&mt6359_vsram_others_ldo_reg>;
	operating-points-v2 = <&gpu_opp_table>;
	power_model@0 {
		compatible = "arm,mali-simple-power-model";
		static-coefficient = <162868>;
		dynamic-coefficient = <2649>;
		ts = <(-199560) 37873 (-665) 9>;
		thermal-zone = "soc_max";
	};
	power_model@1 {
		compatible = "arm,mali-tnax-power-model";
		scale = <5>;
	};
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;
	status = "okay";
	clock-frequency = <400000>;

	touchscreen: touchscreen@10 {
		compatible = "hid-over-i2c";
		reg = <0x10>;
		interrupt-parent = <&pio>;
		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

		pinctrl-names = "default";
		pinctrl-0 = <&touchscreen_pins>;

		post-power-on-delay-ms = <10>;
		hid-descr-addr = <0x0001>;

		vdd-supply = <&pp3300_u>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	status = "okay";
	clock-frequency = <400000>;
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;
	status = "okay";
	clock-frequency = <400000>;
	clock-stretch-ns = <12600>;

	touchpad@15 {
		compatible = "elan,ekth3000";
		reg = <0x15>;

		pinctrl-names = "default";
		pinctrl-0 = <&touchpad_pins>;

		interrupt-parent = <&pio>;
		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;

		vcc-supply = <&pp3300_u>;

		wakeup-source;
	};

};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;
	status = "okay";
	clock-frequency = <400000>;

	anx_bridge: anx7625@58 {
		compatible = "analogix,anx7625";
		reg = <0x58>;
		pinctrl-names = "default";
		pinctrl-0 = <&anx7625_pins>;
		panel_flags = <1>;
		enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
		vdd10-supply = <&pp1000_mipibrdg>;
		vdd18-supply = <&pp1800_mipibrdg>;
		vdd33-supply = <&pp3300_mipibrdg>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			port@0 {
				reg = <0>;
				anx7625_in: endpoint {
					remote-endpoint = <&dsi_out>;
					bus-type = <5>;
					data-lanes = <0 1 2 3>;
				};
			};

			port@1 {
				reg = <1>;
				anx7625_out: endpoint {
					remote-endpoint = <&panel_in>;
				};
			};
		};
	};
};

&i2c6 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c6_pins>;
	status = "okay";
	clock-frequency = <100000>;

	/* TODO: Add SAR sensor. */
};

&i2c7 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c7_pins>;
	status = "okay";
	clock-frequency = <400000>;

	anx_bridge_dp: anx7625@58 {
		compatible = "analogix,anx7625";
		reg = <0x58>;
		pinctrl-names = "default";
		pinctrl-0 = <&anx7625_dp_pins>;
		enable-gpios = <&pio 8 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
		interrupt-parent = <&pio>;
		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
		vdd10-supply = <&pp1000_dpbrdg>;
		vdd18-supply = <&pp1800_dpbrdg>;
		vdd33-supply = <&pp3300_dpbrdg>;

		analogix,lane0-swing = <0x14 0x54 0x64 0x74
					0x29 0x7b 0x77 0x5b
					0x7f 0x7f 0x3f 0x3c
					0x20 0x60 0x3c 0x25
					0x60 0x2c 0x40 0x60>;
		analogix,lane1-swing = <0x14 0x54 0x64 0x74
					0x29 0x7b 0x77 0x5b
					0x7f 0x7f 0x3f 0x3c
					0x20 0x60 0x3c 0x25
					0x60 0x2c 0x40 0x60>;
		anx,tx-rx-to-two-ports;
		#address-cells = <1>;
		#size-cells = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				anx7625_dp_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};
		};

		anx_mux0 {
			compatible = "typec-mode-switch";
			reg = <0>;
			accessory;

			port {
				anx_typec0: endpoint {
					remote-endpoint = <&typec_port0>;
				};
			};
		};

		anx_mux1 {
			compatible = "typec-mode-switch";
			reg = <1>;
			accessory;

			port {
				anx_typec1: endpoint {
					remote-endpoint = <&typec_port1>;
				};
			};
		};
	};
};

&mfg0 {
	domain-supply = <&mt6315_7_vbuck1>;
};

&mipi_tx0 {
	status = "okay";
};

&mmc0 {
	status = "okay";
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc0_pins_default>;
	pinctrl-1 = <&mmc0_pins_uhs>;
	bus-width = <8>;
	max-frequency = <200000000>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	supports-cqe;
	mmc-hs400-enhanced-strobe;
	cap-mmc-hw-reset;
	hs400-ds-delay = <0x12814>;
	no-sdio;
	no-sd;
	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
	non-removable;
};

&mmc1 {
	status = "okay";
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc1_pins_default>;
	pinctrl-1 = <&mmc1_pins_uhs>;
	bus-width = <4>;
	max-frequency = <200000000>;
	cap-sd-highspeed;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&mt6360_ldo5_reg>;
	vqmmc-supply = <&mt6360_ldo3_reg>;
	no-mmc;
	no-sdio;
};

/* for CORE */
&mt6359_vgpu11_buck_reg {
	regulator-always-on;
};

&mt6359_vgpu11_sshub_buck_reg {
	regulator-always-on;
	regulator-min-microvolt = <575000>;
	regulator-max-microvolt = <575000>;
};

&mt6359_vrf12_ldo_reg {
	regulator-always-on;
};

&mt6359_vufs_ldo_reg {
	regulator-always-on;
};

&mt6359codec {
	mediatek,dmic-mode = <1>; /* one-wire */
	mediatek,mic-type-0 = <2>; /* DMIC */
	mediatek,mic-type-2 = <2>; /* DMIC */
};

&nor_flash {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&nor_gpio1_pins>;
	assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;

	flash@0 {
		compatible = "winbond,w25q64", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <52000000>;
		spi-rx-bus-width = <2>;
		spi-tx-bus-width = <2>;
	};
};

&pcie {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pcie_pinmux>;

	pcie0: pcie@0,0 {
		device_type = "pci";
		reg = <0x0000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;
		num-lanes = <1>;
		bus-range = <0x1 0x1>;

		rtw_wifi: rtw_wifi@0,0 {
			reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
			       0x83010000 0x0 0x00100000 0x0 0x00100000>;
			memory-region = <&wifi_restricted_dma_region>;
		};
	};
};

&pio {
	/* 220 lines */
	gpio-line-names = "I2S_DP_LRCK",
			  "IS_DP_BCLK",
			  "I2S_DP_MCLK",
			  "I2S_DP_DATAOUT",
			  "SAR0_INT_ODL",
			  "EC_AP_INT_ODL",
			  "EDPBRDG_INT_ODL",
			  "DPBRDG_INT_ODL",
			  "DPBRDG_PWREN",
			  "DPBRDG_RST_ODL",
			  "I2S_HP_MCLK",
			  "I2S_HP_BCK",
			  "I2S_HP_LRCK",
			  "I2S_HP_DATAIN",
			  /*
			   * AP_FLASH_WP_L is crossystem ABI. Schematics
			   * call it AP_FLASH_WP_ODL.
			   */
			  "AP_FLASH_WP_L",
			  "TRACKPAD_INT_ODL",
			  "EC_AP_HPD_OD",
			  "SD_CD_ODL",
			  "HP_INT_ODL_ALC",
			  "EN_PP1000_DPBRDG",
			  "AP_GPIO20",
			  "TOUCH_INT_L_1V8",
			  "UART_BT_WAKE_ODL",
			  "AP_GPIO23",
			  "AP_SPI_FLASH_CS_L",
			  "AP_SPI_FLASH_CLK",
			  "EN_PP3300_DPBRDG_DX",
			  "AP_SPI_FLASH_MOSI",
			  "AP_SPI_FLASH_MISO",
			  "I2S_HP_DATAOUT",
			  "AP_GPIO30",
			  "I2S_SPKR_MCLK",
			  "I2S_SPKR_BCLK",
			  "I2S_SPKR_LRCK",
			  "I2S_SPKR_DATAIN",
			  "I2S_SPKR_DATAOUT",
			  "AP_SPI_H1_TPM_CLK",
			  "AP_SPI_H1_TPM_CS_L",
			  "AP_SPI_H1_TPM_MISO",
			  "AP_SPI_H1_TPM_MOSI",
			  "BL_PWM",
			  "EDPBRDG_PWREN",
			  "EDPBRDG_RST_ODL",
			  "EN_PP3300_HUB",
			  "HUB_RST_L",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "SD_CLK",
			  "SD_CMD",
			  "SD_DATA3",
			  "SD_DATA0",
			  "SD_DATA2",
			  "SD_DATA1",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "PCIE_WAKE_ODL",
			  "PCIE_RST_L",
			  "PCIE_CLKREQ_ODL",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "SPMI_SCL",
			  "SPMI_SDA",
			  "AP_GOOD",
			  "UART_DBG_TX_AP_RX",
			  "UART_AP_TX_DBG_RX",
			  "UART_AP_TX_BT_RX",
			  "UART_BT_TX_AP_RX",
			  "MIPI_DPI_D0_R",
			  "MIPI_DPI_D1_R",
			  "MIPI_DPI_D2_R",
			  "MIPI_DPI_D3_R",
			  "MIPI_DPI_D4_R",
			  "MIPI_DPI_D5_R",
			  "MIPI_DPI_D6_R",
			  "MIPI_DPI_D7_R",
			  "MIPI_DPI_D8_R",
			  "MIPI_DPI_D9_R",
			  "MIPI_DPI_D10_R",
			  "",
			  "",
			  "MIPI_DPI_DE_R",
			  "MIPI_DPI_D11_R",
			  "MIPI_DPI_VSYNC_R",
			  "MIPI_DPI_CLK_R",
			  "MIPI_DPI_HSYNC_R",
			  "PCM_BT_DATAIN",
			  "PCM_BT_SYNC",
			  "PCM_BT_DATAOUT",
			  "PCM_BT_CLK",
			  "AP_I2C_AUDIO_SCL",
			  "AP_I2C_AUDIO_SDA",
			  "SCP_I2C_SCL",
			  "SCP_I2C_SDA",
			  "AP_I2C_WLAN_SCL",
			  "AP_I2C_WLAN_SDA",
			  "AP_I2C_DPBRDG_SCL",
			  "AP_I2C_DPBRDG_SDA",
			  "EN_PP1800_DPBRDG_DX",
			  "EN_PP3300_EDP_DX",
			  "EN_PP1800_EDPBRDG_DX",
			  "EN_PP1000_EDPBRDG",
			  "SCP_JTAG0_TDO",
			  "SCP_JTAG0_TDI",
			  "SCP_JTAG0_TMS",
			  "SCP_JTAG0_TCK",
			  "SCP_JTAG0_TRSTN",
			  "EN_PP3000_VMC_PMU",
			  "EN_PP3300_DISPLAY_DX",
			  "TOUCH_RST_L_1V8",
			  "TOUCH_REPORT_DISABLE",
			  "",
			  "",
			  "AP_I2C_TRACKPAD_SCL_1V8",
			  "AP_I2C_TRACKPAD_SDA_1V8",
			  "EN_PP3300_WLAN",
			  "BT_KILL_L",
			  "WIFI_KILL_L",
			  "SET_VMC_VOLT_AT_1V8",
			  "EN_SPK",
			  "AP_WARM_RST_REQ",
			  "",
			  "",
			  "EN_PP3000_SD_S3",
			  "AP_EDP_BKLTEN",
			  "",
			  "",
			  "",
			  "AP_SPI_EC_CLK",
			  "AP_SPI_EC_CS_L",
			  "AP_SPI_EC_MISO",
			  "AP_SPI_EC_MOSI",
			  "AP_I2C_EDPBRDG_SCL",
			  "AP_I2C_EDPBRDG_SDA",
			  "MT6315_PROC_INT",
			  "MT6315_GPU_INT",
			  "UART_SERVO_TX_SCP_RX",
			  "UART_SCP_TX_SERVO_RX",
			  "BT_RTS_AP_CTS",
			  "AP_RTS_BT_CTS",
			  "UART_AP_WAKE_BT_ODL",
			  "WLAN_ALERT_ODL",
			  "EC_IN_RW_ODL",
			  "H1_AP_INT_ODL",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "MSDC0_CMD",
			  "MSDC0_DAT0",
			  "MSDC0_DAT2",
			  "MSDC0_DAT4",
			  "MSDC0_DAT6",
			  "MSDC0_DAT1",
			  "MSDC0_DAT5",
			  "MSDC0_DAT7",
			  "MSDC0_DSL",
			  "MSDC0_CLK",
			  "MSDC0_DAT3",
			  "MSDC0_RST_L",
			  "SCP_VREQ_VAO",
			  "AUD_DAT_MOSI2",
			  "AUD_NLE_MOSI1",
			  "AUD_NLE_MOSI0",
			  "AUD_DAT_MISO2",
			  "AP_I2C_SAR_SDA",
			  "AP_I2C_SAR_SCL",
			  "AP_I2C_PWR_SCL",
			  "AP_I2C_PWR_SDA",
			  "AP_I2C_TS_SCL_1V8",
			  "AP_I2C_TS_SDA_1V8",
			  "SRCLKENA0",
			  "SRCLKENA1",
			  "AP_EC_WATCHDOG_L",
			  "PWRAP_SPI0_MI",
			  "PWRAP_SPI0_CSN",
			  "PWRAP_SPI0_MO",
			  "PWRAP_SPI0_CK",
			  "AP_RTC_CLK32K",
			  "AUD_CLK_MOSI",
			  "AUD_SYNC_MOSI",
			  "AUD_DAT_MOSI0",
			  "AUD_DAT_MOSI1",
			  "AUD_DAT_MISO0",
			  "AUD_DAT_MISO1";

	anx7625_dp_pins: anx7625-dp-pins {
		pins1 {
			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>,
				 <PINMUX_GPIO9__FUNC_GPIO9>;
			output-low;
		};
		pins2 {
			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
			input-enable;
			bias-pull-up;
		};
	};

	anx7625_pins: anx7625-pins {
		pins1 {
			pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
				 <PINMUX_GPIO42__FUNC_GPIO42>;
			output-low;
		};
		pins2 {
			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
			input-enable;
			bias-pull-up;
		};
	};

	aud_clk_mosi_off: aud_clk_mosi_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO214__FUNC_GPIO214>,
				 <PINMUX_GPIO215__FUNC_GPIO215>;
		};
	};

	aud_clk_mosi_on: aud_clk_mosi_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>,
				 <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>;
				 drive-strength = <MTK_DRIVE_4mA>;
		};
	};

	aud_dat_miso_ch34_off: aud_dat_miso_ch34_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
		};
	};

	aud_dat_miso_ch34_on: aud_dat_miso_ch34_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
		};
	};

	aud_dat_miso_off: aud_dat_miso_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>,
				 <PINMUX_GPIO219__FUNC_GPIO219>;
		};
	};

	aud_dat_miso_on: aud_dat_miso_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>,
				 <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>;
				 drive-strength = <MTK_DRIVE_4mA>;
		};
	};

	aud_dat_miso2_off: aud_dat_miso2_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
		};
	};

	aud_dat_miso2_on: aud_dat_miso2_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
		};
	};

	aud_dat_mosi_ch34_off: aud_dat_mosi_ch34_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO196__FUNC_GPIO196>;
		};
	};

	aud_dat_mosi_ch34_on: aud_dat_mosi_ch34_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>;
		};
	};

	aud_dat_mosi_off: aud_dat_mosi_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO216__FUNC_GPIO216>,
				 <PINMUX_GPIO217__FUNC_GPIO217>;
		};
	};

	aud_dat_mosi_on: aud_dat_mosi_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>,
				 <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>;
				 drive-strength = <MTK_DRIVE_4mA>;
		};
	};

	aud_gpio_i2s0_off: aud_gpio_i2s0_off {
	};

	aud_gpio_i2s0_on: aud_gpio_i2s0_on {
	};

	aud_gpio_i2s1_off: aud_gpio_i2s1_off {
	};

	aud_gpio_i2s1_on: aud_gpio_i2s1_on {
	};

	aud_gpio_i2s2_off: aud_gpio_i2s2_off {
	};

	aud_gpio_i2s2_on: aud_gpio_i2s2_on {
	};

	aud_gpio_i2s3_off: aud_gpio_i2s3_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO32__FUNC_GPIO32>,
				 <PINMUX_GPIO33__FUNC_GPIO33>,
				 <PINMUX_GPIO35__FUNC_GPIO35>;
		};
	};

	aud_gpio_i2s3_on: aud_gpio_i2s3_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>,
				 <PINMUX_GPIO33__FUNC_I2S3_LRCK>,
				 <PINMUX_GPIO35__FUNC_I2S3_DO>;
		};
	};

	aud_gpio_i2s5_off: aud_gpio_i2s5_off {
	};

	aud_gpio_i2s5_on: aud_gpio_i2s5_on {
	};

	aud_gpio_i2s6_off: aud_gpio_i2s6_off {
	};

	aud_gpio_i2s6_on: aud_gpio_i2s6_on {
	};

	aud_gpio_i2s7_off: aud_gpio_i2s7_off {
	};

	aud_gpio_i2s7_on: aud_gpio_i2s7_on {
	};

	aud_gpio_i2s8_off: aud_gpio_i2s8_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>,
				 <PINMUX_GPIO11__FUNC_GPIO11>,
				 <PINMUX_GPIO12__FUNC_GPIO12>,
				 <PINMUX_GPIO13__FUNC_GPIO13>;
		};
	};

	aud_gpio_i2s8_on: aud_gpio_i2s8_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>,
				 <PINMUX_GPIO11__FUNC_I2S8_BCK>,
				 <PINMUX_GPIO12__FUNC_I2S8_LRCK>,
				 <PINMUX_GPIO13__FUNC_I2S8_DI>;
		};
	};

	aud_gpio_i2s9_off: aud_gpio_i2s9_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
		};
	};

	aud_gpio_i2s9_on: aud_gpio_i2s9_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>;
		};
	};

	aud_gpio_tdm_off: aud_gpio_tdm_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO0__FUNC_GPIO0>,
				 <PINMUX_GPIO1__FUNC_GPIO1>,
				 <PINMUX_GPIO2__FUNC_GPIO2>,
				 <PINMUX_GPIO3__FUNC_GPIO3>;
		};
	};

	aud_gpio_tdm_on: aud_gpio_tdm_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>,
				 <PINMUX_GPIO1__FUNC_TDM_BCK>,
				 <PINMUX_GPIO2__FUNC_TDM_MCK>,
				 <PINMUX_GPIO3__FUNC_TDM_DATA0>;
		};
	};

	aud_nle_mosi_off: aud_nle_mosi_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO197__FUNC_GPIO197>,
				 <PINMUX_GPIO198__FUNC_GPIO198>;
		};
	};

	aud_nle_mosi_on: aud_nle_mosi_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>,
				 <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>;
		};
	};

	bt_pins: bt-pins {
		bt_kill: bt_kill {
			pinmux = <PINMUX_GPIO144__FUNC_GPIO144>; /* BT_KILL_L */
			output-low;
		};
		bt_wake: bt_wake {
			pinmux = <PINMUX_GPIO22__FUNC_GPIO22>;  /* bt to wake ap */
			bias-pull-up;
		};
		ap_wake_bt: ap_wake_bt {
			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>; /* AP_WAKE_BT_H */
			output-low;
		};
	};

	dpi_pin_default: dpi_pin_default {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
				<PINMUX_GPIO97__FUNC_GPIO97>,
				<PINMUX_GPIO98__FUNC_GPIO98>,
				<PINMUX_GPIO99__FUNC_GPIO99>,
				<PINMUX_GPIO100__FUNC_GPIO100>,
				<PINMUX_GPIO101__FUNC_GPIO101>,
				<PINMUX_GPIO102__FUNC_GPIO102>,
				<PINMUX_GPIO103__FUNC_GPIO103>,
				<PINMUX_GPIO104__FUNC_GPIO104>,
				<PINMUX_GPIO105__FUNC_GPIO105>,
				<PINMUX_GPIO106__FUNC_GPIO106>,
				<PINMUX_GPIO110__FUNC_GPIO110>,
				<PINMUX_GPIO113__FUNC_GPIO113>,
				<PINMUX_GPIO111__FUNC_GPIO111>,
				<PINMUX_GPIO109__FUNC_GPIO109>,
				<PINMUX_GPIO112__FUNC_GPIO112>;
				drive-strength = <MTK_DRIVE_6mA>;
				output-low;
		};
	};

	dpi_pin_func: dpi_pin_func {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO96__FUNC_DPI_D0>,
				<PINMUX_GPIO97__FUNC_DPI_D1>,
				<PINMUX_GPIO98__FUNC_DPI_D2>,
				<PINMUX_GPIO99__FUNC_DPI_D3>,
				<PINMUX_GPIO100__FUNC_DPI_D4>,
				<PINMUX_GPIO101__FUNC_DPI_D5>,
				<PINMUX_GPIO102__FUNC_DPI_D6>,
				<PINMUX_GPIO103__FUNC_DPI_D7>,
				<PINMUX_GPIO104__FUNC_DPI_D8>,
				<PINMUX_GPIO105__FUNC_DPI_D9>,
				<PINMUX_GPIO106__FUNC_DPI_D10>,
				<PINMUX_GPIO110__FUNC_DPI_D11>,
				<PINMUX_GPIO113__FUNC_DPI_HSYNC>,
				<PINMUX_GPIO111__FUNC_DPI_VSYNC>,
				<PINMUX_GPIO109__FUNC_DPI_DE>,
				<PINMUX_GPIO112__FUNC_DPI_CK>;
				drive-strength = <MTK_DRIVE_6mA>;
		};
	};

	ec_ap_int_odl: ec_ap_int_odl {
		pins1 {
			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
			input-enable;
			bias-pull-up;
		};
	};

	h1_int_od_l: h1_int_od_l {
		pins1 {
			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
			input-enable;
		};
	};

	i2c0_pins: i2c0 {
		pins_bus {
			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
				 <PINMUX_GPIO205__FUNC_SDA0>;
			bias-pull-up;
			mediatek,pull-up-adv = <3>;
			mediatek,drive-strength-adv = <0>;
			drive-strength = <1>;
		};
	};

	i2c1_pins: i2c1 {
		pins_bus {
			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
				 <PINMUX_GPIO119__FUNC_SDA1>;
			bias-pull-up;
			mediatek,pull-up-adv = <3>;
			mediatek,drive-strength-adv = <7>;
		};
	};

	i2c2_pins: i2c2 {
		pins_bus {
			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
				 <PINMUX_GPIO142__FUNC_SDA2>;
			bias-pull-up;
			mediatek,pull-up-adv = <3>;
			mediatek,drive-strength-adv = <0>;
		};
	};

	i2c3_pins: i2c3 {
		pins_bus {
			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
				 <PINMUX_GPIO161__FUNC_SDA3>;
			bias-disable;
			mediatek,drive-strength-adv = <7>;
		};
	};

	i2c6_pins: i2c6 {
		pins_bus {
			pinmux = <PINMUX_GPIO200__FUNC_SCL6>,
				 <PINMUX_GPIO201__FUNC_SDA6>;
			bias-pull-up;
			mediatek,pull-up-adv = <3>;
			mediatek,drive-strength-adv = <7>;
		};
	};

	i2c7_pins: i2c7 {
		pins_bus {
			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
				 <PINMUX_GPIO125__FUNC_SDA7>;
			bias-disable;
			mediatek,drive-strength-adv = <7>;
		};
	};

	mmc0_pins_default: mmc0default {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
			input-enable;
			drive-strength = <3>;
			mediatek,pull-up-adv = <1>;
		};

		pins_clk {
			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
			drive-strength = <3>;
			mediatek,pull-down-adv = <2>;
		};

		pins_rst {
			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
			drive-strength = <3>;
			mediatek,pull-down-adv = <1>;
		};
	};

	mmc0_pins_uhs: mmc0uhs{
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
			input-enable;
			drive-strength = <4>;
			mediatek,pull-up-adv = <1>;
		};

		pins_clk {
			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
			drive-strength = <4>;
			mediatek,pull-down-adv = <2>;
		};

		pins_rst {
			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
			drive-strength = <3>;
			mediatek,pull-down-adv = <1>;
		};

		pins_ds {
			pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
			drive-strength = <4>;
			mediatek,pull-down-adv = <2>;
		};
	};

	mmc1_pins_default: mmc1default {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
			input-enable;
			drive-strength = <3>;
			mediatek,pull-up-adv = <1>;
		};

		pins_clk {
			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
			drive-strength = <3>;
			mediatek,pull-down-adv = <2>;
		};

		pins_insert {
			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
			input-enable;
			bias-pull-up;
		};
	};

	mmc1_pins_uhs: mmc1@0 {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
			input-enable;
			drive-strength = <3>;
			mediatek,pull-up-adv = <1>;
		};

		pins_clk {
			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
			drive-strength = <3>;
			mediatek,pull-down-adv = <2>;
			input-enable;
		};
	};

	nor_gpio1_pins: nor {
		pins1 {
			pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
				 <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
			input-enable;
			drive-strength = <MTK_DRIVE_4mA>;
			bias-pull-up;
		};

		pins2 {
			pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
			drive-strength = <MTK_DRIVE_4mA>;
			bias-pull-up;
		};

		pins_clk {
			pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
			input-enable;
			drive-strength = <MTK_DRIVE_4mA>;
			bias-pull-up;
		};
	};

	pcie_pinmux: pcie_pinmux {
		pcie_wake {
			pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
			bias-pull-up;
		};
		pcie_pereset {
			pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
		};
		pcie_clkreq {
			pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
			bias-pull-up;
		};
		pcie_en_pp3300_wlan: pcie_en_pp3300_wlan {
			/* TODO: Model as a regulator */
			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
			output-high;
		};
		/* TODO: Split and implement. */
		wifi_kill: wifi_kill {
			pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
			output-high;
		};
	};

	pp1000_dpbrdg_en: pp1000-dpbrdg-en {
		pins1 {
			pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
			output-low;
		};
	};

	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
		pins1 {
			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
			output-low;
		};
	};

	pp1800_dpbrdg_en: pp1800-dpbrdg-en {
		pins1 {
			pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
			output-low;
		};
	};

	pp1800_mipibrdg_en: pp1800-mipibrd-en {
		pins1 {
			pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
			output-low;
		};
	};

	pp3300_dpbrdg_en: pp3300-dpbrdg-en {
		pins1 {
			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
			output-low;
		};
	};

	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
		pins1 {
			pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
			output-low;
		};
	};

	pp3300_panel_pins: pp3300-panel-pins {
		panel_3v3_enable: panel-3v3-enable {
			pinmux = <PINMUX_GPIO136__FUNC_GPIO136>;
			output-low;
		};
	};

	ppvarn_lcd_en: ppvarn-lcd-en {
		pins1 {
			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
			output-low;
		};
	};

	ppvarp_lcd_en: ppvarp-lcd-en {
		pins1 {
			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
			output-low;
		};
	};

	pwm0_pin_default: pwm0_pin_default {
		pins_pwm {
			pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>;
		};
		pins_inhibit {
			pinmux = <PINMUX_GPIO152__FUNC_GPIO152>;
			output-high;
		};
	};

	scp_pins: scp {
		pins_scp_vreq {
			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
		};
	};

	spi_pins_1: spi1@0 {
		pins_spi{
			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
			bias-disable;
		};
		pins_spi_mi {
			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
			bias-pull-down;
		};
	};

	spi_pins_5: spi5@0 {
		pins_spi{
			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
				 <PINMUX_GPIO37__FUNC_GPIO37>,
				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
			bias-disable;
		};
	};

	touchpad_pins: touchpad-pins {
		touchpad_int {
			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
			input-enable;
			mediatek,pull-up-adv = <3>;
		};
	};

	touchscreen_pins: touchscreen-pins {
		pin_irq {
			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
			input-enable;
			bias-pull-up;
		};
		touch_pin_reset: pin_reset {
			pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
			output-high;
		};
		touch_pin_report_sw: pin_report_sw {
			pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
			output-low;
		};
	};

	uart1_pins: uart1-pins {
		pins_rx {
			pinmux = <PINMUX_GPIO94__FUNC_URXD1>;
			input-enable;
			bias-pull-up;
		};
		pins_tx {
			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
		};
		pins_cts {
			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
			input-enable;
		};
		pins_rts {
			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
			output-enable;
		};
	};

	uart1_pins_sleep: uart1-pins-sleep {
		pins_rx {
			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
			input-enable;
			bias-pull-up;
		};
		pins_tx {
			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
		};
		pins_cts {
			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
			input-enable;
		};
		pins_rts {
			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
			output-enable;
		};
	};

	vow_clk_miso_off: vow_clk_miso_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO219__FUNC_GPIO219>;
		};
	};

	vow_clk_miso_on: vow_clk_miso_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>;
		};
	};

	vow_dat_miso_off: vow_dat_miso_off {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>;
		};
	};

	vow_dat_miso_on: vow_dat_miso_on {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>;
		};
	};
};

&pmic {
	interrupt-parent = <&pio>;
	interrupts = <214 IRQ_TYPE_LEVEL_HIGH>;
};

&pwm0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pwm0_pin_default>;
};

&scp {
	memory-region = <&scp_mem_reserved>;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&scp_pins>;

	cros_ec {
		compatible = "google,cros-ec-rpmsg";
		mtk,rpmsg-name = "cros-ec-rpmsg";
	};
};

&spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi_pins_1>;
	mediatek,pad-select = <0>;
	status = "okay";

	cros_ec: ec@0 {
		compatible = "google,cros-ec-spi";
		reg = <0>;
		spi-max-frequency = <3000000>;
		interrupt-parent = <&pio>;
		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&ec_ap_int_odl>;

		#address-cells = <1>;
		#size-cells = <0>;

		i2c_tunnel: i2c-tunnel {
			compatible = "google,cros-ec-i2c-tunnel";
			google,remote-bus = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		base_detection: cbas {
			compatible = "google,cros-cbas";
		};

		mt6360_ldo3_reg: regulator@0 {
			compatible = "google,cros-ec-regulator";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <3300000>;
			reg = <0>;
		};

		mt6360_ldo5_reg: regulator@1 {
			compatible = "google,cros-ec-regulator";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			reg = <1>;
		};

		typec {
			compatible = "google,cros-ec-typec";
			#address-cells = <1>;
			#size-cells = <0>;

			usb_c0: connector@0 {
				compatible = "usb-c-connector";
				reg = <0>;
				label = "left";
				power-role = "dual";
				data-role = "host";
				try-power-role = "source";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@1 {
						reg = <1>;

						typec_port0: endpoint {
							remote-endpoint = <&anx_typec0>;
						};
					};
				};
			};

			usb_c1: connector@1 {
				compatible = "usb-c-connector";
				reg = <1>;
				label = "right";
				power-role = "dual";
				data-role = "host";
				try-power-role = "source";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@1 {
						reg = <1>;

						typec_port1: endpoint {
							remote-endpoint = <&anx_typec1>;
						};
					};
				};
			};
		};
	};
};

&spi5 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi_pins_5>;
	mediatek,pad-select = <0>;
	status = "okay";
	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;

	cr50@0 {
		compatible = "google,cr50";
		reg = <0>;
		spi-max-frequency = <1000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&h1_int_od_l>;
		interrupt-parent = <&pio>;
		interrupts = <171 IRQ_TYPE_EDGE_RISING>;
	};
};

&spmi {
	grpid = <11>;
	mt6315_6: pmic@6 {
		compatible = "mediatek,mt6315-regulator";
		reg = <0x6 0>;

		regulators {
			mt6315_6_vbuck1: vbuck1 {
				regulator-compatible = "vbuck1";
				regulator-name = "Vbcpu";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1193750>;
				regulator-enable-ramp-delay = <256>;
				regulator-allowed-modes = <0 1 2 4>;
				regulator-always-on;
			};

			mt6315_6_vbuck3: vbuck3 {
				regulator-compatible = "vbuck3";
				regulator-name = "Vlcpu";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1193750>;
				regulator-enable-ramp-delay = <256>;
				regulator-allowed-modes = <0 1 2 4>;
				regulator-always-on;
			};
		};
	};

	mt6315_7: pmic@7 {
		compatible = "mediatek,mt6315-regulator";
		reg = <0x7 0>;

		regulators {
			mt6315_7_vbuck1: vbuck1 {
				regulator-compatible = "vbuck1";
				regulator-name = "Vgpu";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1193750>;
				regulator-enable-ramp-delay = <256>;
				regulator-allowed-modes = <0 1 2 4>;
			};
		};
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart1_pins>;
	pinctrl-1 = <&uart1_pins_sleep>;
	interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
			      <&pio 94 IRQ_TYPE_EDGE_FALLING>;

	bluetooth: bluetooth {
		compatible = "realtek,rtl8822cs-bt";
		pinctrl-names = "default";
		pinctrl-0 = <&bt_pins>;

		enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>;
		device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>;
	};
};

&xhci {
	vusb33-supply = <&pp3300_g>;
	vbus-supply = <&pp5000_a>;
	wakeup-source;
	status = "okay";
};

#include <arm/cros-ec-keyboard.dtsi>
#include <arm/cros-ec-sbs.dtsi>

&cros_ec {
	cros_ec_pwm: ec-pwm {
		compatible = "google,cros-ec-pwm";
		#pwm-cells = <1>;
		status = "disabled";
	};
};